darkstonexa 25.02.05 06:20

I only just noticed today, that the levels that are marked out on the fibonaci fan are wrong.

put it on a chart and you'll notice that the 38.2 retracement is marked as a 61.8 retracement and the the 61.8 is marked as being the 38.2 retracement.

I tried deleting the levels and re-adding them but that didn't fix it..

Slawa 25.02.05 12:06

please do not forget tell about buld number

darkstonexa 25.02.05 15:03

Sorry I forgot to mention that it was on build 155

Slawa 25.02.05 15:19

try push Defaults button on the Levels tab of properties sheet. then set your preferred levels

darkstonexa 25.02.05 21:03

already tried that and tried again just now.

the 38.2 & 61.8 labels are on the wrong lines.

Slawa 28.02.05 12:10

you can insert manually preferred labels (after text changing do not forget press "enter")
these labels will be applied to next all such objects

darkstonexa 28.02.05 18:01

Looks like I'm going to have to post a picture.

Setting manual lables doesn't work either.

I deleted all the labels. and then added
0.382 for the line level, now it doesn't matter what I call it the label allways gets attached to the level that should be 0.684 level
and vice a versa for the the 0.684 level.

Slawa 28.02.05 19:15

what is "setting manual labels doesn't work either"?
You select Fibonacchi Fan properties. You double click on the desired level description. edit box with old description appears. You change description and press "enter" button. description leaves unchanged.

darkstonexa 01.03.05 05:27

Okay here is an image of what I am talking about.

It doesn't matter what the labels/ Description says,
its the levels that I've marked are wrong.
Notice the level 0.382 is associated with the wrong fibo fan line on the chart.
and the same for the 0.618

Slawa 01.03.05 11:03

i see. You had to preset this picture first. thanx for found bug. will be fixed